The ecological relevance of current approaches for environmental protection from exposure to ionising radiation

This paper discusses the current approaches to environmental protection from ionising radiation from an ecological perspective, highlighting the need to understand fully what we are trying to protect. Ecologically relevant endpoints for environmental protection are discussed along with the need to integrate protection from ionising radiation with the approaches adopted for non-radioactive contaminants. A possible integrated assessment approach is outlined.     

Heavy metals in four fish species from the French coast of the Eastern English Channel and Southern Bight of the North Sea

Shallow coastal waters act as nurseries for various fish species and have been recognized as essential fish habitat. We studied heavy metal concentrations in four fish species (plaice, dab, flounder and cod) as an indicator of large-scale habitat quality. The study took place along the French coasts between the Eastern English Channel and the Southern Bight of the North Sea. All species show different concentrations of measured metals (e.g., Cd, Cu, Mn and Pb) in liver but not in muscle. The highest concentrations are found for the flounder and the lowest for cod which is consistent with their habitat and diet. Although our results do not highlight levels of appreciable pollution within the study area, inter-site differences are mainly observed in the muscle tissues and are generally in agreement with the known environmental data (e.g., anthropogenic pressure). However, in the Bay of Seine, one of the most contaminated estuaries in Europe, metal concentrations are in the same range or even lower than those found in fish collected from areas distant from any anthropogenic pressures. At one site, the comparisons of the Cd, Cu and Pb concentrations between healthy and diseased dabs have been carried out on the muscle and liver tissues. The results of this preliminary study show a relationship between metal concentrations and the pathological status of the fish. The use of fish health as indicator of habitat quality is discussed.     

Modeling flow and nitrate fate at catchment scale in Brittany (France)

In the intensive pig-farming (Sus scrofa) area of Brittany (western France), many surface and subsurface water resources are contaminated by nitrate (NO3) with concentrations that chronically exceed the European Community 50 mg L(-1) drinking standard. To ensure sustainable water supply, the fate of NO3 must be considered in both surface water and ground water. The fate of N was investigated in a Britain catchment, the Co?t-Dan watershed, with an integrated management tool: the hydrological SWAT model coupled with the ground water model MODFLOW, and its companion contaminant and solute transport model MT3DMS. The model was validated with respect to water quantity during a 6-yr period and for the NO3 concentration during a 44-mo period, at two gauging stations in the catchment. The coupled models reproduced accurately the measurements. At the basin outlet, the Nash-Sutcliffe coefficients were 0.88 for monthly flow for the entire period and 0.87 for monthly N load. Alternative scenarios were simulated and showed potential benefits of decreasing manure application from 210 to 170 kg N ha(-1) as required by the European Commission Nitrates Directive.     

Observations on the workshop as a means of improving communication between holders of traditional and scientific knowledge

Traditional ecological knowledge (TEK) and the information and insights it offers to natural resource research and management have been given much attention in recent years. On the practical question of how TEK is accessed and used together with scientific knowledge, most work to date has examined documentation and methods of recording and disseminating information. Relatively little has been done regarding exchanges between scientific and traditional knowledge. This paper examines three workshop settings in which such exchanges were intended outcomes. The Barrow Symposium on Sea Ice, the Exxon Valdez Oil Spill Restoration Program Synthesis/Information Workshops, and the Alaska Beluga Whale Committee illuminate certain features of the preparation, format, and context of workshops or series of workshops and their eventual outcomes and influence. The examples show the importance of long-term relationships among participants and thorough preparation before the actual workshop. Further research should look more systematically at the factors that influence the success of a given workshop and the various ways in which participants perceive success.     

Investigation of appropriate initial composition and aeration method for co-composting of yard waste and market wastes

The purpose of this research was to shorten the composting period by speeding up the composting process and to obtain good quality compost that can be used in agriculture. In order to accomplish the acceleration of the process, different mixtures of feedstock were loaded to the composting containers to observe the effect of initial composition on the quality of the compost and the rate of composting. The first feedstock prepared was composed of grass, leaves and market waste whereas the second feedstock composed only of leaves and market wastes. Composting process was accomplished by applying different composting methods such as composting without manual stirring, with manual stirring, with aeration by air, with aeration by oxygen, with manual stirring and aeration by air and finally by with manual stirring and aeration by oxygen to achieve the purpose of the research. Aeration was found as a primary requirement for the acceleration of composting because it was observed that when the aeration was not applied the conversion of nutrients was very low. The high conversion efficiency of the nutrients in the feedstock with market and yard wastes-without grass-resulted in higher quality end product. The organic content of the composted yard and market wastes were monitored and the best operational parameters and methods were identified. Parameters such as temperature, moisture, pH and end-product metal contents were also monitored in the study. and the experiments were run in duplicates. Corrected C/N, (C/N)t/(C/N)initial, were used in the calculations which provided objectivity in comparison of the compost quality with respect to nutritional components. The C/N change was found to be higher in the container that was manually stirred and aerated with oxygen but with regard to the economic feasibility of the system aeration with air was preferred. Compost quality that was achieved in the study was compared to the standards of different countries with respect to the amount of metal contents in the end-product. The applicability of the end-product in agriculture depends on the level of contaminants in the compost, especially metals that have to be present only in trace amounts.     

Differences between blood and liver aromatic DNA adduct formation

Aromatic DNA adducts in the livers and blood of grey mullet (Mugil sp.) have been monitored between 1993 and 1996 by the isolation of DNA and the postlabeling of the DNA adducts with 32P. The grey mullet were sampled from three well-characterised harbours, two in the northeastern Mediterranean and one in the northeastern Black Sea near Trabzon close to a site of aquaculture. One of the northeastern Mediterranean harbours was highly polluted with polynuclear aromatic hydrocarbons (PAHs) and was rich in inorganic nutrients. Larger grey mullet lived in this harbour than the other harbours and their livers possessed approximately 100 aromatic DNA adducts per 10(8) nucleotides. The livers from grey mullet in the other two harbours possessed < or = 25 aromatic DNA adducts per 10(8) nucleotides but these concentrations depended on a variety of factors. Blood cell being regenerated more rapidly than liver cells, it is found that generally the ratio of DNA adduct concentrations in piscine liver and blood will increase with the pollution of the surrounding marine environment. Fishes are acceptable models for the metabolism of xenobiotics and the associated formation of harmful aromatic DNA adducts in organisms.     

Arsenic in marine sediments from French Mediterranean ports: Geochemical partitioning,bioavailability and ecotoxicology

This work investigates arsenic mobility, bioavailability and toxicity in marine port sediments using chemical sequential extraction and laboratory toxicity tests. Sediment samples were collected from two different Mediterranean ports, one highly polluted with arsenic and other inorganic and organic pollutants (Estaque port (EST)), and the other one, less polluted, with a low arsenic content (Saint Mandrier port (SM)). Arsenic distribution in the solid phase was studied using a sequential extraction procedure specifically developed for appraising arsenic mobility in sediments. Toxicity assessment was performed on sediment elutriates, solid phases and aqueous arsenic species as single substance using the embryo-toxicity test on oyster larvae (Crassostrea gigas) and the Microtox test with Vibrio fischeri. Toxicity results showed that all sediment samples presented acute and sub-chronic toxic effects on oyster larvae and bacteria, respectively. The Microtox solid phase test allow to discriminate As-contaminated samples from the less contaminated ones, suggesting that toxicity of whole sediment samples is related to arsenic content. Toxicity of dissolved arsenic species as single substance showed that Vibrio fischeri and oyster larvae are most sensitive to As(V) than As(III). The distribution coefficient (Kd) of arsenic in sediment samples was estimated using results obtained in chemical sequential extractions. The Kd value is greater in SM (450 L kg^?1) than in EST (55 L kg^?1), indicating that arsenic availability is higher for the most toxic sediment sample (Estaque port). This study demonstrates that arsenic speciation play an important role on arsenic mobility and its bioavailability in marine port sediments.     

Source Apportionment of Phoenix PM2.5 Aerosol with the Unmix Receptor Model

Abstract

The multivariate receptor model Unmix has been used to analyze a 3-yr PM_2.5 ambient aerosol data set collected in Phoenix, AZ, beginning in 1995. The analysis generated source profiles and overall average percentage source contribution estimates (SCEs) for five source categories: gasoline engines (33 ± 4%), diesel engines (16 ± 2%), secondary SO₄ ^2? (19 ± 2%), crustal/soil (22 ± 2%), and vegetative burning (10 ± 2%). The Unmix analysis was supplemented with scanning electron microscopy (SEM) of a limited number of filter samples for information on possible additional low-strength sources. Except for the diesel engine source category, the Unmix SCEs were generally consistent with an earlier multivariate receptor analysis of essentially the same data using the Positive Matrix Factorization (PMF) model. This article provides the first demonstration for an urban area of the capability of the Unmix receptor model.     

A Comparison of Two Techniques for the Collection and Analysis of Polynuclear Aromatic Compounds in Ambient Air

A demonstration of the GHEMFIX solidification/stabilization process was conducted under the United States Environmental Protection Agency’s (EPA) Superfund Innovative Technology Evaluation (SITE) program. The demonstration was conducted in March 1989, at the Portable Equipment Salvage Company (PESC) uncontrolled hazardous waste site in Clackamas, Oregon. Waste containing lead, copper, and polychlorinated biphenyls (PCBs) from four different areas of the site were treated. Results showed substantial reduction of leachable lead and copper between the untreated waste and treated waste utilizing the EPA Toxicity Characteristics Leaching Procedure (TCLP) test. The effectiveness of this process for immobilizing PCBs could not be determined since the raw waste did not leach PCBs at high concentrations, utilizing the TCLP test. Data from other leaching tests for lead and copper would need to be utilized as input into a site specific groundwater model to determine whether solidification/stabilization would be an acceptable remedy for the site. Physical testing results indicated durability in exposed conditions.